6.2 Number Protocol

int PyNumber_Check(

PyObject *o)

Returns 1 if the object o provides numeric protocols, and false otherwise. This function always succeeds.

PyObject* PyNumber_Add(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of adding o1 and o2, or NULL on failure. This is the equivalent of the Python expression "o1 + o2".

PyObject* PyNumber_Subtract(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of subtracting o2 from o1, or NULL on failure. This is the equivalent of the Python expression "o1 - o2".

PyObject* PyNumber_Multiply(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of multiplying o1 and o2, or NULL on failure. This is the equivalent of the Python expression "o1 * o2".

PyObject* PyNumber_Divide(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of dividing o1 by o2, or NULL on failure. This is the equivalent of the Python expression "o1 / o2".

PyObject* PyNumber_FloorDivide(

PyObject *o1, PyObject *o2)

Return value: New reference.

Return the floor of o1 divided by o2, or NULL on failure. This is equivalent to the ``classic'' division of integers. New in version 2.2.

PyObject* PyNumber_TrueDivide(

PyObject *o1, PyObject *o2)

Return value: New reference.

Return a reasonable approximation for the mathematical value of o1 divided by o2, or NULL on failure. The return value is ``approximate'' because binary floating point numbers are approximate; it is not possible to represent all real numbers in base two. This function can return a floating point value when passed two integers. New in version 2.2.

PyObject* PyNumber_Remainder(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the remainder of dividing o1 by o2, or NULL on failure. This is the equivalent of the Python expression "o1 % o2".

PyObject* PyNumber_Divmod(

PyObject *o1, PyObject *o2)

Return value: New reference.

See the built-in function divmod(). Returns NULL on failure. This is the equivalent of the Python expression "divmod(o1, o2)".

PyObject* PyNumber_Power(

PyObject *o1, PyObject *o2, PyObject *o3)

Return value: New reference.

See the built-in function pow(). Returns NULL on failure. This is the equivalent of the Python expression "pow(o1, o2, o3)", where o3 is optional. If o3 is to be ignored, pass Py_None in its place (passing NULL for o3 would cause an illegal memory access).

PyObject* PyNumber_Negative(

PyObject *o)

Return value: New reference.

Returns the negation of o on success, or NULL on failure. This is the equivalent of the Python expression "-o".

PyObject* PyNumber_Positive(

PyObject *o)

Return value: New reference.

Returns o on success, or NULL on failure. This is the equivalent of the Python expression "+o".

PyObject* PyNumber_Absolute(

PyObject *o)

Return value: New reference.

Returns the absolute value of o, or NULL on failure. This is the equivalent of the Python expression "abs(o)".

PyObject* PyNumber_Invert(

PyObject *o)

Return value: New reference.

Returns the bitwise negation of o on success, or NULL on failure. This is the equivalent of the Python expression "~o".

PyObject* PyNumber_Lshift(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of left shifting o1 by o2 on success, or NULL on failure. This is the equivalent of the Python expression "o1 << o2".

PyObject* PyNumber_Rshift(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of right shifting o1 by o2 on success, or NULL on failure. This is the equivalent of the Python expression "o1 >> o2".

PyObject* PyNumber_And(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the ``bitwise and'' of o1 and o2 on success and NULL on failure. This is the equivalent of the Python expression "o1 & o2".

PyObject* PyNumber_Xor(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the ``bitwise exclusive or'' of o1 by o2 on success, or NULL on failure. This is the equivalent of the Python expression "o1 ^ o2".

PyObject* PyNumber_Or(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the ``bitwise or'' of o1 and o2 on success, or NULL on failure. This is the equivalent of the Python expression "o1 | o2".

PyObject* PyNumber_InPlaceAdd(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of adding o1 and o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 += o2".

PyObject* PyNumber_InPlaceSubtract(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of subtracting o2 from o1, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 -= o2".

PyObject* PyNumber_InPlaceMultiply(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of multiplying o1 and o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 *= o2".

PyObject* PyNumber_InPlaceDivide(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of dividing o1 by o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 /= o2".

PyObject* PyNumber_InPlaceFloorDivide(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the mathematical floor of dividing o1 by o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 //= o2". New in version 2.2.

PyObject* PyNumber_InPlaceTrueDivide(

PyObject *o1, PyObject *o2)

Return value: New reference.

Return a reasonable approximation for the mathematical value of o1 divided by o2, or NULL on failure. The return value is ``approximate'' because binary floating point numbers are approximate; it is not possible to represent all real numbers in base two. This function can return a floating point value when passed two integers. The operation is done in-place when o1 supports it. New in version 2.2.

PyObject* PyNumber_InPlaceRemainder(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the remainder of dividing o1 by o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 %= o2".

PyObject* PyNumber_InPlacePower(

PyObject *o1, PyObject *o2, PyObject *o3)

Return value: New reference.

See the built-in function pow(). Returns NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 **= o2" when o3 is Py_None, or an in-place variant of "pow(o1, o2, o3)" otherwise. If o3 is to be ignored, pass Py_None in its place (passing NULL for o3 would cause an illegal memory access).

PyObject* PyNumber_InPlaceLshift(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of left shifting o1 by o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 <<= o2".

PyObject* PyNumber_InPlaceRshift(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the result of right shifting o1 by o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 >>= o2".

PyObject* PyNumber_InPlaceAnd(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the ``bitwise and'' of o1 and o2 on success and NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 &= o2".

PyObject* PyNumber_InPlaceXor(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the ``bitwise exclusive or'' of o1 by o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 ^= o2".

PyObject* PyNumber_InPlaceOr(

PyObject *o1, PyObject *o2)

Return value: New reference.

Returns the ``bitwise or'' of o1 and o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement "o1 |= o2".

int PyNumber_Coerce(

PyObject **p1, PyObject **p2)

This function takes the addresses of two variables of type PyObject*. If the objects pointed to by *p1 and *p2 have the same type, increment their reference count and return 0 (success). If the objects can be converted to a common numeric type, replace *p1 and *p2 by their converted value (with 'new' reference counts), and return 0. If no conversion is possible, or if some other error occurs, return -1 (failure) and don't increment the reference counts. The call PyNumber_Coerce(&o1, &o2) is equivalent to the Python statement "o1, o2 = coerce(o1, o2)".

PyObject* PyNumber_Int(

PyObject *o)

Return value: New reference.

Returns the o converted to an integer object on success, or NULL on failure. If the argument is outside the integer range a long object will be returned instead. This is the equivalent of the Python expression "int(o)".

PyObject* PyNumber_Long(

PyObject *o)

Return value: New reference.

Returns the o converted to a long integer object on success, or NULL on failure. This is the equivalent of the Python expression "long(o)".

PyObject* PyNumber_Float(

PyObject *o)

Return value: New reference.

Returns the o converted to a float object on success, or NULL on failure. This is the equivalent of the Python expression "float(o)".

PyObject* PyNumber_Index(

PyObject *o)

Returns the o converted to a Python int or long on success or NULL with a TypeError exception raised on failure. New in version 2.5.

Py_ssize_t PyNumber_AsSsize_t(

PyObject *o, PyObject *exc)

Returns o converted to a Py_ssize_t value if o can be interpreted as an integer. If o can be converted to a Python int or long but the attempt to convert to a Py_ssize_t value would raise an OverflowError, then the exc argument is the type of exception that will be raised (usually IndexError or OverflowError). If exc is NULL, then the exception is cleared and the value is clipped to PY_SSIZE_T_MIN for a negative integer or PY_SSIZE_T_MAX for a positive integer. New in version 2.5.

int PyIndex_Check(

PyObject *o)

Returns True if o is an index integer (has the nb_index slot of the tp_as_number structure filled in). New in version 2.5.

See About this document... for information on suggesting changes.