IdentifiantMot de passe
Loading...
Mot de passe oublié ?Je m'inscris ! (gratuit)
tarfile — Read and write tar archive files — Python v3.0 documentation

tarfile — Read and write tar archive files¶

The tarfile module makes it possible to read and write tar archives, including those using gzip or bz2 compression. (.zip files can be read and written using the zipfile module.)

Some facts and figures:

  • reads and writes gzip and bz2 compressed archives.
  • read/write support for the POSIX.1-1988 (ustar) format.
  • read/write support for the GNU tar format including longname and longlink extensions, read-only support for the sparse extension.
  • read/write support for the POSIX.1-2001 (pax) format.
  • handles directories, regular files, hardlinks, symbolic links, fifos, character devices and block devices and is able to acquire and restore file information like timestamp, access permissions and owner.
tarfile.open(name=None, mode='r', fileobj=None, bufsize=10240, **kwargs)¶

Return a TarFile object for the pathname name. For detailed information on TarFile objects and the keyword arguments that are allowed, see TarFile Objects.

mode has to be a string of the form 'filemode[:compression]', it defaults to 'r'. Here is a full list of mode combinations:

mode action
'r' or 'r:*' Open for reading with transparent compression (recommended).
'r:' Open for reading exclusively without compression.
'r:gz' Open for reading with gzip compression.
'r:bz2' Open for reading with bzip2 compression.
'a' or 'a:' Open for appending with no compression. The file is created if it does not exist.
'w' or 'w:' Open for uncompressed writing.
'w:gz' Open for gzip compressed writing.
'w:bz2' Open for bzip2 compressed writing.

Note that 'a:gz' or 'a:bz2' is not possible. If mode is not suitable to open a certain (compressed) file for reading, ReadError is raised. Use mode 'r' to avoid this. If a compression method is not supported, CompressionError is raised.

If fileobj is specified, it is used as an alternative to a file object opened for name. It is supposed to be at position 0.

For special purposes, there is a second format for mode: 'filemode|[compression]'. tarfile.open() will return a TarFile object that processes its data as a stream of blocks. No random seeking will be done on the file. If given, fileobj may be any object that has a read() or write() method (depending on the mode). bufsize specifies the blocksize and defaults to 20 * 512 bytes. Use this variant in combination with e.g. sys.stdin, a socket file object or a tape device. However, such a TarFile object is limited in that it does not allow to be accessed randomly, see Examples. The currently possible modes:

Mode Action
'r|*' Open a stream of tar blocks for reading with transparent compression.
'r|' Open a stream of uncompressed tar blocks for reading.
'r|gz' Open a gzip compressed stream for reading.
'r|bz2' Open a bzip2 compressed stream for reading.
'w|' Open an uncompressed stream for writing.
'w|gz' Open an gzip compressed stream for writing.
'w|bz2' Open an bzip2 compressed stream for writing.
class tarfile.TarFile¶
Class for reading and writing tar archives. Do not use this class directly, better use tarfile.open() instead. See TarFile Objects.
tarfile.is_tarfile(name)¶
Return True if name is a tar archive file, that the tarfile module can read.

The tarfile module defines the following exceptions:

exception tarfile.TarError¶
Base class for all tarfile exceptions.
exception tarfile.ReadError¶
Is raised when a tar archive is opened, that either cannot be handled by the tarfile module or is somehow invalid.
exception tarfile.CompressionError¶
Is raised when a compression method is not supported or when the data cannot be decoded properly.
exception tarfile.StreamError¶
Is raised for the limitations that are typical for stream-like TarFile objects.
exception tarfile.ExtractError¶
Is raised for non-fatal errors when using TarFile.extract(), but only if TarFile.errorlevel== 2.
exception tarfile.HeaderError¶
Is raised by TarInfo.frombuf() if the buffer it gets is invalid.

Each of the following constants defines a tar archive format that the tarfile module is able to create. See section Supported tar formats for details.

tarfile.USTAR_FORMAT¶
POSIX.1-1988 (ustar) format.
tarfile.GNU_FORMAT¶
GNU tar format.
tarfile.PAX_FORMAT¶
POSIX.1-2001 (pax) format.
tarfile.DEFAULT_FORMAT¶
The default format for creating archives. This is currently GNU_FORMAT.

The following variables are available on module level:

tarfile.ENCODING¶
The default character encoding i.e. the value from either sys.getfilesystemencoding() or sys.getdefaultencoding().

See also

Module zipfile
Documentation of the zipfile standard module.
GNU tar manual, Basic Tar Format
Documentation for tar archive files, including GNU tar extensions.

TarFile Objects¶

The TarFile object provides an interface to a tar archive. A tar archive is a sequence of blocks. An archive member (a stored file) is made up of a header block followed by data blocks. It is possible to store a file in a tar archive several times. Each archive member is represented by a TarInfo object, see TarInfo Objects for details.

class tarfile.TarFile(name=None, mode='r', fileobj=None, format=DEFAULT_FORMAT, tarinfo=TarInfo, dereference=False, ignore_zeros=False, encoding=ENCODING, errors=None, pax_headers=None, debug=0, errorlevel=0)

All following arguments are optional and can be accessed as instance attributes as well.

name is the pathname of the archive. It can be omitted if fileobj is given. In this case, the file object’s name attribute is used if it exists.

mode is either 'r' to read from an existing archive, 'a' to append data to an existing file or 'w' to create a new file overwriting an existing one.

If fileobj is given, it is used for reading or writing data. If it can be determined, mode is overridden by fileobj‘s mode. fileobj will be used from position 0.

Note

fileobj is not closed, when TarFile is closed.

format controls the archive format. It must be one of the constants USTAR_FORMAT, GNU_FORMAT or PAX_FORMAT that are defined at module level.

The tarinfo argument can be used to replace the default TarInfo class with a different one.

If dereference is False, add symbolic and hard links to the archive. If it is True, add the content of the target files to the archive. This has no effect on systems that do not support symbolic links.

If ignore_zeros is False, treat an empty block as the end of the archive. If it is True, skip empty (and invalid) blocks and try to get as many members as possible. This is only useful for reading concatenated or damaged archives.

debug can be set from 0 (no debug messages) up to 3 (all debug messages). The messages are written to sys.stderr.

If errorlevel is 0, all errors are ignored when using TarFile.extract(). Nevertheless, they appear as error messages in the debug output, when debugging is enabled. If 1, all fatal errors are raised as OSError or IOError exceptions. If 2, all non-fatal errors are raised as TarError exceptions as well.

The encoding and errors arguments define the character encoding to be used for reading or writing the archive and how conversion errors are going to be handled. The default settings will work for most users. See section Unicode issues for in-depth information.

The pax_headers argument is an optional dictionary of strings which will be added as a pax global header if format is PAX_FORMAT.

TarFile.open(...)¶
Alternative constructor. The tarfile.open() function is actually a shortcut to this classmethod.
TarFile.getmember(name)¶

Return a TarInfo object for member name. If name can not be found in the archive, KeyError is raised.

Note

If a member occurs more than once in the archive, its last occurrence is assumed to be the most up-to-date version.

TarFile.getmembers()¶
Return the members of the archive as a list of TarInfo objects. The list has the same order as the members in the archive.
TarFile.getnames()¶
Return the members as a list of their names. It has the same order as the list returned by getmembers().
TarFile.list(verbose=True)¶
Print a table of contents to sys.stdout. If verbose is False, only the names of the members are printed. If it is True, output similar to that of ls -l is produced.
TarFile.next()¶
Return the next member of the archive as a TarInfo object, when TarFile is opened for reading. Return None if there is no more available.
TarFile.extractall(path=".", members=None)¶

Extract all members from the archive to the current working directory or directory path. If optional members is given, it must be a subset of the list returned by getmembers(). Directory information like owner, modification time and permissions are set after all members have been extracted. This is done to work around two problems: A directory’s modification time is reset each time a file is created in it. And, if a directory’s permissions do not allow writing, extracting files to it will fail.

Warning

Never extract archives from untrusted sources without prior inspection. It is possible that files are created outside of path, e.g. members that have absolute filenames starting with "/" or filenames with two dots "..".

TarFile.extract(member, path="")¶

Extract a member from the archive to the current working directory, using its full name. Its file information is extracted as accurately as possible. member may be a filename or a TarInfo object. You can specify a different directory using path.

Note

The extract() method does not take care of several extraction issues. In most cases you should consider using the extractall() method.

Warning

See the warning for extractall().

TarFile.extractfile(member)¶

Extract a member from the archive as a file object. member may be a filename or a TarInfo object. If member is a regular file, a file-like object is returned. If member is a link, a file-like object is constructed from the link’s target. If member is none of the above, None is returned.

Note

The file-like object is read-only and provides the following methods: read(), readline(), readlines(), seek(), tell().

TarFile.add(name, arcname=None, recursive=True, exclude=None)¶
Add the file name to the archive. name may be any type of file (directory, fifo, symbolic link, etc.). If given, arcname specifies an alternative name for the file in the archive. Directories are added recursively by default. This can be avoided by setting recursive to False. If exclude is given, it must be a function that takes one filename argument and returns a boolean value. Depending on this value the respective file is either excluded (True) or added (False).
TarFile.addfile(tarinfo, fileobj=None)¶

Add the TarInfo object tarinfo to the archive. If fileobj is given, tarinfo.size bytes are read from it and added to the archive. You can create TarInfo objects using gettarinfo().

Note

On Windows platforms, fileobj should always be opened with mode 'rb' to avoid irritation about the file size.

TarFile.gettarinfo(name=None, arcname=None, fileobj=None)¶
Create a TarInfo object for either the file name or the file object fileobj (using os.fstat() on its file descriptor). You can modify some of the TarInfo‘s attributes before you add it using addfile(). If given, arcname specifies an alternative name for the file in the archive.
TarFile.close()¶
Close the TarFile. In write mode, two finishing zero blocks are appended to the archive.
TarFile.pax_headers¶
A dictionary containing key-value pairs of pax global headers.

TarInfo Objects¶

A TarInfo object represents one member in a TarFile. Aside from storing all required attributes of a file (like file type, size, time, permissions, owner etc.), it provides some useful methods to determine its type. It does not contain the file’s data itself.

TarInfo objects are returned by TarFile‘s methods getmember(), getmembers() and gettarinfo().

class tarfile.TarInfo(name="")¶
Create a TarInfo object.
TarInfo.frombuf(buf)¶

Create and return a TarInfo object from string buffer buf.

Raises HeaderError if the buffer is invalid..

TarInfo.fromtarfile(tarfile)¶
Read the next member from the TarFile object tarfile and return it as a TarInfo object.
TarInfo.tobuf(format=DEFAULT_FORMAT, encoding=ENCODING, errors='strict')¶
Create a string buffer from a TarInfo object. For information on the arguments see the constructor of the TarFile class.

A TarInfo object has the following public data attributes:

TarInfo.name¶
Name of the archive member.
TarInfo.size¶
Size in bytes.
TarInfo.mtime¶
Time of last modification.
TarInfo.mode¶
Permission bits.
TarInfo.type¶
File type. type is usually one of these constants: REGTYPE, AREGTYPE, LNKTYPE, SYMTYPE, DIRTYPE, FIFOTYPE, CONTTYPE, CHRTYPE, BLKTYPE, GNUTYPE_SPARSE. To determine the type of a TarInfo object more conveniently, use the is_*() methods below.
TarInfo.linkname¶
Name of the target file name, which is only present in TarInfo objects of type LNKTYPE and SYMTYPE.
TarInfo.uid¶
User ID of the user who originally stored this member.
TarInfo.gid¶
Group ID of the user who originally stored this member.
TarInfo.uname¶
User name.
TarInfo.gname¶
Group name.
TarInfo.pax_headers¶
A dictionary containing key-value pairs of an associated pax extended header.

A TarInfo object also provides some convenient query methods:

TarInfo.isfile()¶
Return True if the Tarinfo object is a regular file.
TarInfo.isreg()¶
Same as isfile().
TarInfo.isdir()¶
Return True if it is a directory.
TarInfo.issym()¶
Return True if it is a symbolic link.
TarInfo.islnk()¶
Return True if it is a hard link.
TarInfo.ischr()¶
Return True if it is a character device.
TarInfo.isblk()¶
Return True if it is a block device.
TarInfo.isfifo()¶
Return True if it is a FIFO.
TarInfo.isdev()¶
Return True if it is one of character device, block device or FIFO.

Examples¶

How to extract an entire tar archive to the current working directory:

import tarfile
tar = tarfile.open("sample.tar.gz")
tar.extractall()
tar.close()

How to extract a subset of a tar archive with TarFile.extractall() using a generator function instead of a list:

import os
import tarfile

def py_files(members):
    for tarinfo in members:
        if os.path.splitext(tarinfo.name)[1] == ".py":
            yield tarinfo

tar = tarfile.open("sample.tar.gz")
tar.extractall(members=py_files(tar))
tar.close()

How to create an uncompressed tar archive from a list of filenames:

import tarfile
tar = tarfile.open("sample.tar", "w")
for name in ["foo", "bar", "quux"]:
    tar.add(name)
tar.close()

How to read a gzip compressed tar archive and display some member information:

import tarfile
tar = tarfile.open("sample.tar.gz", "r:gz")
for tarinfo in tar:
    print(tarinfo.name, "is", tarinfo.size, "bytes in size and is", end="")
    if tarinfo.isreg():
        print("a regular file.")
    elif tarinfo.isdir():
        print("a directory.")
    else:
        print("something else.")
tar.close()

Supported tar formats¶

There are three tar formats that can be created with the tarfile module:

  • The POSIX.1-1988 ustar format (USTAR_FORMAT). It supports filenames up to a length of at best 256 characters and linknames up to 100 characters. The maximum file size is 8 gigabytes. This is an old and limited but widely supported format.

  • The GNU tar format (GNU_FORMAT). It supports long filenames and linknames, files bigger than 8 gigabytes and sparse files. It is the de facto standard on GNU/Linux systems. tarfile fully supports the GNU tar extensions for long names, sparse file support is read-only.

  • The POSIX.1-2001 pax format (PAX_FORMAT). It is the most flexible format with virtually no limits. It supports long filenames and linknames, large files and stores pathnames in a portable way. However, not all tar implementations today are able to handle pax archives properly.

    The pax format is an extension to the existing ustar format. It uses extra headers for information that cannot be stored otherwise. There are two flavours of pax headers: Extended headers only affect the subsequent file header, global headers are valid for the complete archive and affect all following files. All the data in a pax header is encoded in UTF-8 for portability reasons.

There are some more variants of the tar format which can be read, but not created:

  • The ancient V7 format. This is the first tar format from Unix Seventh Edition, storing only regular files and directories. Names must not be longer than 100 characters, there is no user/group name information. Some archives have miscalculated header checksums in case of fields with non-ASCII characters.
  • The SunOS tar extended format. This format is a variant of the POSIX.1-2001 pax format, but is not compatible.

Unicode issues¶

The tar format was originally conceived to make backups on tape drives with the main focus on preserving file system information. Nowadays tar archives are commonly used for file distribution and exchanging archives over networks. One problem of the original format (which is the basis of all other formats) is that there is no concept of supporting different character encodings. For example, an ordinary tar archive created on a UTF-8 system cannot be read correctly on a Latin-1 system if it contains non-ASCII characters. Textual metadata (like filenames, linknames, user/group names) will appear damaged. Unfortunately, there is no way to autodetect the encoding of an archive. The pax format was designed to solve this problem. It stores non-ASCII metadata using the universal character encoding UTF-8.

The details of character conversion in tarfile are controlled by the encoding and errors keyword arguments of the TarFile class.

encoding defines the character encoding to use for the metadata in the archive. The default value is sys.getfilesystemencoding() or 'ascii' as a fallback. Depending on whether the archive is read or written, the metadata must be either decoded or encoded. If encoding is not set appropriately, this conversion may fail.

The errors argument defines how characters are treated that cannot be converted. Possible values are listed in section Codec Base Classes. In read mode the default scheme is 'replace'. This avoids unexpected UnicodeError exceptions and guarantees that an archive can always be read. In write mode the default value for errors is 'strict'. This ensures that name information is not altered unnoticed.

In case of writing PAX_FORMAT archives, encoding is ignored because non-ASCII metadata is stored using UTF-8.